Bravo continues to conduct systematic first-pass drilling, coupled with BHEM, on the priority EM conductors identified by the HeliTEM survey. Although these modelled HeliTEM conductors have a lower degree of locational accuracy, they are sufficiently defined to position first-pass drilling proximal to the conductor's location. From there, BHEM provides more precise location of EM anomalies for drill testing. Of the 17 priority EM anomalies identified in the HeliTEM survey (see press release September 11, 2023), Bravo had narrowed this list to 11 high priority conductors that warranted follow-up drilling of predominantly off-hole BHEM conductors. T5, T6, T16 and now T11 are four of these 11 HeliTEM targets.

T5 Target

Figure 2 shows the mineralization intersected in DDH2405T003 at the T5 target (Figure 5), located 50m west and along strike of previously reported high-grade copper-gold mineralization in hole DDH2405T002 (see press release May 28, 2023) which intercepted 11.48m at 14.3% Cu, 3.3g/t Au including 2.9m at 22.9% Cu, 3.6g/t Au.

Figure 2: Breccia copper sulphides in DH2405T003 (158.9 – 162.5m shown).

Drill hole DDH2405T003 (Figure 3) intersected 5.2m (grading 3.1% Cu, 1.1g/t Au) of breccia-hosted copper sulphide mineralization, at the T5 target. Like hole DDH2405T002, located 50m to the east, mineralization is interpreted to be consistent with typical copper/gold mineralization seen in the Carajás Mineral Province, and unrelated to the Luanga PGM+Au+Ni Deposit.

DDH2405T006 (Figure 3. Assays pending) has been completed down-dip of (below) hole DH2405T002, intersecting significant hydrothermal alteration consistent with that expected proximal (close) to the mineralization. Drilling is paused while BHEM (Figure 4) is completed on drill holes DDH2405T003, DDH2405T004, DDH2405T005 and DDH2405T006 to better establish the dip/plunge of mineralization before the next round of drilling.

DDH2405T005, located up dip of (above) DDH2405T002 (Figure 3), intersected weathered mineralization in the oxidized zone, where mineralization is interpreted to be weathered away.

T5 mineralization remains open along strike, and down dip. BHEM surveying is in progress (Figure 4).

Figure 3: Off-hole conductors at T5 generated from DDH2405T001. Location of drill holes DDH2405T003, DDH2405T005 and DDH2405T006.

Figure 4: BHEM survey team in operation at the T5 Target –  drill holes DDH2405T003, DDH2405T004, DDH2405T005 and DDH2405T006.

T11 Target

The T11 target is located proximal to the ultramafic footwall of the Central Sector of the Luanga PGM+Au+Ni deposit. The pilot drill hole (DDH2311T001, Figure 5) targeting the HeliTEM anomaly was shown to be too shallow and was drilled up-dip of the EM conductors which were subsequently better defined by BHEM to be deeper. DDH2411T002 (Figure 5) targeted the center of this group of 10 conductors at a more appropriate depth, successfully intersecting four zones of mineralization within an approximately 190m wide hydrothermal alteration zone.

Figure 6 shows the intersected mineralization, which consists of four sulphide-rich intervals within the hydrothermal alteration system. Mineralization presents as patches and veins, locally reaching massive (Figure 1) to semi-massive textures. The main sulphide paragenesis is pyrrhotite > pentlandite (Ni sulphide) >> chalcopyrite (Cu sulphide), thus generating a strong EM response made up of multiple conductors, which present as the four sulphide-rich zones intersected. Assays are pending.

Figure 5: Off-hole conductors at T11 generated from DDH2411T001. Location of drill holes DDH2411T001 and 002

At 96m depth drill hole DDH2411T002 intersects the ultramafic footwall of the Luanga deposit, intersecting an Fe-Ca alteration system which consists of magnetite, grunerite, hornblende, actinolite, biotite and almandine. This mineralogical assemblage is similar to other IOCG-style mineralized systems that occur within the Carajás Mineral Province, and is likely unrelated to the primary Luanga PGM deposit mineralization which is at a stratigraphically higher level. BHEM will be completed on DDH2411T002 prior to commencing follow-up drilling.

Figure 6: DDH2411T002 Sulphide mineralization – patches and veins, locally reaching massive/semi-massive (215m to 230m shown).

Drill Results Status Update

A total of 304 drill holes have been completed to date by Bravo, for 65,113 metres, including 8 metallurgical holes (not subject to routine assaying). Results have been reported for 252 Bravo drill holes to date. Assay results for 44 Bravo drill holes that have been completed are currently outstanding (excluding the metallurgical holes). Bravo plans to extend the current EM drilling program from 3,000m to 8,000m, to continue drilling testing and follow up drilling of EM anomalies.

Complete Table of Recent Intercepts.

 

Figure 7: Location of Bravo Drilling at the T5 and T11 targets, reported in this News Release

About Bravo Mining Corp.

Bravo is a Canadian and Brazil-based mineral exploration and development company focused on advancing its Luanga Project in the world-class Carajás Mineral Province of Brazil

Bravo is the most active explorer in Carajás. The team, comprising local and international geologists, has a proven track record of PGM, nickel, and copper discoveries in the region. They have successfully taken a past IOCG greenfield project from resource definition to development and production in Carajás.

The Luanga Project is situated on mature freehold farming land and benefits from being in a location close to operating mines and a mining-experienced workforce, with excellent access and proximity to existing infrastructure, including road, rail, and clean renewable hydro grid power. A fully funded 63,000m infill, step out and exploration drilling and trenching program is well advanced for 2024. Bravo's current Environmental, Social and Governance activities includes planting more than 30,000 high-value trees in the project area, hiring and contracting locally, and ensuring protection of the environment during its exploration activities.

Technical Disclosure

Technical information in this news release has been reviewed and approved by Simon Mottram, F.AusIMM (Fellow Australia Institute of Mining and Metallurgy), President of Bravo Mining Corp. who serves as the Company's "qualified person" as defined in National Instrument 43-101 Standards of Disclosure for Mineral Projects ("NI 43-101"). Mr. Mottram has verified the technical data and opinions contained in this news release.

For further information about Bravo, please visit www.bravomining.com or contact:

Luis Azevedo, Chairman and CEO or
Alex Penha, EVP Corporate Development
T: +1-416-509-0583
[email protected]

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

Forward Looking Statements 

This news release contains forward-looking information which is not comprised of historical facts. Forward-looking information is characterized by words such as "very", "encouraging", "promising", "exciting", "priority", "successfully", "discovery", "strong EM response", variants of these words and other similar words, phrases, or statements that certain events or conditions "may" or "will" occur. This news release contains forward-looking information pertaining to the Company's ongoing drill program and the results thereof; the potential for new and/or different styles of mineralization in some areas, such as IOCG-style, the presence of which is publicly well documented in the Carajás mineral province; whether or not the mineralization interested at T5 and/or T11 is in fact IOCG-style, some variant of such or another style of mineralization; the potential continuity of mineralization between holes; the grades and implications of unassayed holes; the visual and XRF identification of minerals in the core; whether the mineralization at T5 and T11 is open to expansion or not; whether the other anomalies are related to mineralization; and the Company's plans in respect thereof. Forward-looking information involves risks, uncertainties and other factors that could cause actual events, results, and opportunities to differ materially from those expressed or implied by such forward-looking information. Factors that could cause actual results to differ materially from such forward-looking information include, but are not limited to, unexpected results from exploration programs, changes in the state of equity and debt markets, fluctuations in commodity prices, delays in obtaining required regulatory or governmental approvals, environmental risks, limitations on insurance coverage; and other risks and uncertainties involved in the mineral exploration and development industry. Forward-looking information in this news release is based on the opinions and assumptions of management considered reasonable as of the date hereof, including, but not limited to, the assumption that the assay results confirm that the interpreted along strike and up and down dip; that activities will not be adversely disrupted or impeded by regulatory, political, community, economic, environmental and/or healthy and safety risks; that the Luanga Project will not be materially affected by potential supply chain disruptions; and general business and economic conditions will not change in a materially adverse manner. Although the Company believes that the assumptions and factors used in preparing the forward-looking information in this news release are reasonable, undue reliance should not be placed on such information. The Company disclaims any intention or obligation to update or revise any forward-looking information, other than as required by applicable securities laws.

Schedule 1: Drill Hole Collar Details

Schedule 2: Assay Methodologies and QAQC

Samples follow a chain of custody between collection, processing, and delivery to the SGS Geosol laboratory in Parauapebas, state of Para?, Brazil. The drill core is delivered to the core shack at Bravo's Luanga site facilities and processed by geologists who insert certified reference materials, blanks, and duplicates into the sampling sequence. Drill core is half cut and placed in secured polyurethane bags, then in security-sealed sacks before being delivered directly from the Luanga site facilities to the Parauapebas SGS Geosol laboratory by Bravo staff. Additional information about the methodology can be found on the SGS Geosol website (SGS) in their analytical guides. Information regarding preparation and analysis of historic drill core is also presented in the table below, where the information is known.

Quality Assurance and Quality Control ("QAQC") is maintained internally at the lab through rigorous use of internal certified reference materials, blanks, and duplicates. An additional QAQC program is administered by Bravo using certified reference materials, duplicate samples and blank samples that are blindly inserted into the sample batch. If a QAQC sample returns an unacceptable value an investigation into the results is triggered and when deemed necessary, the samples that were tested in the batch with the failed QAQC sample are re-tested.

SOURCE Bravo Mining Corp.

View original content to download multimedia: https://www.newswire.ca/en/releases/archive/July2024/08/c9862.html